STLs are exclusively reserved for private and personal use. It means not selling the model or any derivative of the model for economic gain.

[License](https://creativecommons.org/licenses/by-nc-sa/4.0/)

![petalot](https://github.com/function3d/petalot/raw/master/STLs/petalot_v1.1.png)

# Print Guide

Material Usage: 425g.

I slice the parts in Cura with 2 perimeters and alternate extra wall, 4 top and bottom layers, seam: "sharpest corner" and "smart hiding", 0.44mm line width, 30% infill and 0.2mm layer height, gyroid infill. Combing mode: not on outer surface.

if you have tolerance problems try changing the "horizontal expansion" (-0.05, -0.1, ...).

All the parts can be printed on a 200mm x 200mm build plate.